Reports from Students in
 ITDPT 303, Manufacturing Systems
Fall 2002 - Ball State University

Research Reports | Reverse Engineering / Rapid Prototyping | Automated Production

All information contained in these reports is the responsibility of the authors.
Clicking a link will cause a document to open in a new window.
Please direct course-related questions to Jim Flowers at jcflowers1@bsu.edu
Links to reports will become inactive as students graduate or remove their reports.
Course syllabus

Research Reports

Assignment Information

Saud Ambusaidi: Laser Machining
www.bsu.edu/web/sambusaidi/laser_machining.htm

Brad Benner: Hot Forging
www.bsu.edu/web/bmbenner/hotforging.html

Leon Dyer: Paper Manufacturing
www.bsu.edu/web/ltdyer/paper_manufacturing.htm

Rodrigo Garcia de Alba Hernandez: Injection Molding
www.bsu.edu/web/rgarciadealb/injectionmoldingresearch.html

Scott Hager: Programmable Logic Controllers
 www.bsu.edu/web/slhager/bsu/plchomepage.htm

David Kelly: An Introduction to Die Casting
 www.bsu.edu/web/dbkelly/dcstng.htm

Adam Maassel: Steel Manufacturing
 bsu.edu/web/acmaassel/steel.html

Laura Morford: Investment Casting
http://www.bsu.edu/web/llmorford/investcast.html

Joe Moring: QS-9000
delta214.com/joe/

RJ Nethaway: Coordinate Metrology Machines
www.bsu.edu/web/rjnethaway/index.html

Craig Patterson: The Production of Stainless Steel
www.bsu.edu/web/crpatterson2/Classes/ITDPT303/aluminum.htm

Dwayne Rodgers: The Manufacturing Process of Galvanizing Material
www.bsu.edu/web/darodgers/galvanize.htm

David Schaffenberger: Silicon Chip Manufacturing
the draft can be found at:
www.bsu.edu/web/dmschaffenbe/ITDPT303/ResearchReport/Mainpage.htm

Joe Stanley: Aluminum Extrusion
www.bsu.edu/web/jestanley/aluminumextrusion.htm

Stephen Troyer: Dairy Processing: From the Cow to the Jug
www.bsu.edu/web/smtroyer/classes/itdpt303/dairy.html

Mike Williams: History of Robotics
www.bsu.edu/web/MAWILLIAMS/history.html

Wes Wisner: Rotational Molding
www.bsu.edu/web/wwisner/rotational_molding1.htm

Reverse Engineering & Rapid Prototyping Reports

Assignment Information
Leon Dyer, Laura Morford, & David Schaffenberger
 www.bsu.edu/web/dmschaffenbe/ITDPT303/WEB/Main.htm
Adam Maassel, & Joe Moring
 www.bsu.edu/web/acmaassel/Manufacturing/Rapid.htm
Craig Patterson, Joe Stanley, & Mike Williams
 www.bsu.edu/web/crpatterson2/fdm.htm
Saud Ambusaidi, Brad Benner, & Dwayne Rodgers
www.bsu.edu/web/sambusaidi/Prototyping%20Process.html

Scott Hager, Rodrigo Garcia de Alba Hernandez, & David Kelly
 www.bsu.edu/web/slhager/rapidprototype/RPHomepage.htm
RJ Nethaway, Stephen Troyer, & Wes Wisner
 www.bsu.edu/web/smtroyer/classes/itdpt303/fdm.html

Automated Production Reports

Assignment Information
Rodrigo Garcia, Scott Hagar, David Kelly,  RJ Nethaway, Stephen Troyer, & Wes Wisner
http://www.bsu.edu/web/smtroyer/classes/itdpt303/303group.html
Leon Dyer, Adam Maassel, Laura Morford, Joe Moring, & David Schaffenberger
 www.bsu.edu/web/llmorford/Automated/mainpage.htm
Saud Ambusaidi, Brad Benner, Craig Patterson, Dwayne Rodgers , Joe Stanley, & Mike Williams
www.bsu.edu/web/jestanley/303automatedsystem1.html